DIY Wood Mirror Frame - Simple And Creative Project
Create a mixed material piece for your wall with this wood mirror frame can be designed to fit any space with the right dimensions. Natural unfinished wood and mirror accented with colorful tape creates a fun relaxed piece for a gallery wall or as wall art in whatsoever room.
View in gallery Create a slender off-centered artful look with this skinny mirror and wood combination equally seen here or go for a more traditional vanity mirror with a standard 8×x″ or 11×xiv″ mirror centered on wood. Read on for the full tutorial!
View in gallery Supplies you'll need for a rustic-modernistic mirror frame:
- Mirror (cut to size at your hardware store)
- Wood (cutting to size at your hardware store)
- Sanding block or paper
- Decorative Tape (washi or textile tape)
- Tube of mirror adhesive
- Caulking gun
- Backet with nails
- Hammer
- Tape measure
- Window cleaner and textile
Instructions step by footstep to build a mirror wall frame:
View in gallery Pace ane: Measure and Cutting
You will commencement out by measuring out your space and planning your project. Based on your desired dimensions you will have your local hardware store cut you a piece of mirror and a piece of plywood to size. Sand the edges of the plywood if needed to soften the edges (nosotros left this version unfinished, yous tin optionally cease your wood later on it's cut if desired).
To protect the edges of the mirror (and your fingers!) use decorative tape around the edges of the mirror (use half on the forepart and so wrap around the back). Edge the entire mirror with tape.
Stride 2. Apply adhesive on the back
Flip the mirror over and utilise mirror adhesive with your caulking gun. Once the mirror adhesive is applied place your mirror in where you lot desire it on your piece of wood.
Step 3: Printing firmly
Hold the mirror confronting the wood firmly and use a few books stacked evenly over the mirror to keep it in place while information technology is drying (use a few heavy books on the center and ends of the mirror). Allow it to dry out over dark.
Pace 4: Add together brackets
Lastly, to hang your mirror you volition need to identify a bracket on the back. Use a tape measure out to measure and mark the centre near the top of the mirror. Identify the subclass at the center and hammer the nails in identify.
Step 5: Cleaning mirror
Once your mirror is finished, use a fabric and window cleaner to clean up any smudges and smears from fingerprints or the record adhesive. Place a screw in the wall and hang up your new mirror!
View in gallery 
View in gallery 
View in gallery Source: https://www.homedit.com/wood-framed-mirror/
0 Response to "DIY Wood Mirror Frame - Simple And Creative Project"
Enregistrer un commentaire